BackBack
Dophin CO2 canister filter in black and blue beside its retail box, common priming model.
Dophin CO2 canister filter feature sheet covering CO2 mixing, heater compartment and priming.
Dophin CO2 canister filter component list with model comparison and performance data table.

The KW Zone Dophin CO2 Canister Filter is built for planted aquariums. The CO2 mixing system is integrated into the canister rather than added as a separate inline reactor, so dissolved CO2 enters the tank already blended with filtered water. This 950 L/h model is the most affordable way into the range and suits planted tanks up to 90 litres, using the standard common priming mechanism.

Key Features

  • 950 L/h output at just 10W, for planted aquariums up to 90 litres (24 US gallons).
  • Built-in CO2 mixing system, removing the need for a separate inline reactor.
  • Common priming mechanism, the standard version of this filter.
  • Built-in heater compartment, so the heater comes out of the display tank.
  • Mechanical, biological and chemical filtration in one canister.
  • Detachable power valve taps for servicing without draining the hoses.

Technical Specifications

Maximum output 950 L/h
Power 10 W
Voltage 220–240 V / 50 Hz
Suitable tank size Up to 90 L (24 US gal)
Priming Common priming
Heater compartment Fits 22–24 mm heater, CE / 3C standard

Important: CO2 and Heater Notes

  • A CO2 cylinder is not included. The filter provides the mixing system; the gas supply is bought separately.
  • Do not unplug the filter before disconnecting the CO2 tubes. If you cut the power with the CO2 still connected, water will overflow back through the CO2 intake tube.
  • Turn off the CO2 cylinder whenever the system is not in use.
  • The heater compartment takes a 22–24 mm heater built to CE or 3C standard. Check the diameter before buying.

Setup & Maintenance

Site the canister below the tank water line so the siphon primes correctly. Rinse mechanical media in tank water rather than tap water to protect the biological colony. Close the valve taps before disconnecting hoses for a service.

Choosing the Right Model

This range comes in three flow rates, each in a fast start-up or common priming version: 950 L/h for tanks to 90 L, 1200 L/h to 120 L, and 1450 L/h to 140 L. If priming a canister by hand is something you would rather avoid, the fast start-up version of this same filter has a stronger primer.

Safety

  • Disconnect from the mains before opening the canister, after disconnecting the CO2 tubes.
  • Never run the filter dry.
  • For indoor aquarium use only.

Kw zone dophin co2 canister filter common priming - 950 l/h

950 L/h | Planted Tanks to 90L | CO2 Mixing Built In | Common Priming

AED 473.00

sold in last hours

Buy this product and Earn 473 Points!

Available Offers

15% Off Your First Order*

Use code: FIRSTORDER15

Exclusive 15% Off for Emirates Platinum Cardholders

Use code: EMIRATES15

Get 15% OFF on your first three app orders!

Use code: APP15

Delivery Information

Select Emirate
  • Free Shipping Free Shipping
  • Free Shipping Easy Return
  • Free Shipping Fast Delivery
Order in the next to get it by
Buy now pay later
Use these payment methods on checkout
4 interest-free payments Select Tabby at checkout
You'll get SMS reminders for repayment. You can repay using your Mastercard or Visa debit and credit cards
Split in 4, interest-free Select Tamara at checkout
You'll get SMS reminders for repayment. You can repay using your Mastercard or Visa debit and credit cards

The KW Zone Dophin CO2 Canister Filter is built for planted aquariums. The CO2 mixing system is integrated into the canister rather than added as a separate inline reactor, so dissolved CO2 enters the tank already blended with filtered water. This 950 L/h model is the most affordable way into the range and suits planted tanks up to 90 litres, using the standard common priming mechanism.

Key Features

  • 950 L/h output at just 10W, for planted aquariums up to 90 litres (24 US gallons).
  • Built-in CO2 mixing system, removing the need for a separate inline reactor.
  • Common priming mechanism, the standard version of this filter.
  • Built-in heater compartment, so the heater comes out of the display tank.
  • Mechanical, biological and chemical filtration in one canister.
  • Detachable power valve taps for servicing without draining the hoses.

Technical Specifications

Maximum output 950 L/h
Power 10 W
Voltage 220–240 V / 50 Hz
Suitable tank size Up to 90 L (24 US gal)
Priming Common priming
Heater compartment Fits 22–24 mm heater, CE / 3C standard

Important: CO2 and Heater Notes

  • A CO2 cylinder is not included. The filter provides the mixing system; the gas supply is bought separately.
  • Do not unplug the filter before disconnecting the CO2 tubes. If you cut the power with the CO2 still connected, water will overflow back through the CO2 intake tube.
  • Turn off the CO2 cylinder whenever the system is not in use.
  • The heater compartment takes a 22–24 mm heater built to CE or 3C standard. Check the diameter before buying.

Setup & Maintenance

Site the canister below the tank water line so the siphon primes correctly. Rinse mechanical media in tank water rather than tap water to protect the biological colony. Close the valve taps before disconnecting hoses for a service.

Choosing the Right Model

This range comes in three flow rates, each in a fast start-up or common priming version: 950 L/h for tanks to 90 L, 1200 L/h to 120 L, and 1450 L/h to 140 L. If priming a canister by hand is something you would rather avoid, the fast start-up version of this same filter has a stronger primer.

Safety

  • Disconnect from the mains before opening the canister, after disconnecting the CO2 tubes.
  • Never run the filter dry.
  • For indoor aquarium use only.